SYNTHETIC CHEMICAL VINA
Expert in glue and dispensing solutions
Expert in glue and dispensing solutions
RECOMMENDED APPLIED MATERIAL
TAD-105 dispensing system is ideal for high viscosity materials like thermal grease, silicone, epoxy, heavy lubricants
SPECIFICATIONS OF DISPENSING CONTROLLER
| Model | TAD-200V |
| Control Method | Electronic/ Pneumatic system |
| Dispensing pressure |
0~10kg/cm² (Standard) 0~4kg/cm² (L: Option) 0~2kg/cm² (P: Option) |
| Time range | 0.01 ~ 99.99 sec |
| Interval timer | 0.01 ~ 3.99 sec |
| Out signal |
Open connector, DC 24V 20mmsec (Relay), 100mmsec (Relay) |
| Power source | AC220V 50/60Hz (AC100V 50/60Hz: Option) |
| Power comsumption | 32W |
| External Dimension & Weight | 232(W) x 186(D) x 81(H) mm, 2.7kg |
SPECIFICATIONS OF PRESSURE TANK
| Model | PCP-∝135 |
| Pump sending radio | 10:1 |
| Volume per stroke (cc) |
8 |
| Applying viscosity | 10,000 ~ 600,000 cps |
| Air pressure | 1~7 bar |
| Air consumption |
80ml/min (max) |
| Applying container | 1 kg, 3 kg, 5 kg |
| Power | AC220V 50/60Hz (110V: Option) |
| Weight | 9.5 kg |
