SYNTHETIC CHEMICAL VINA
Expert in glue and dispensing solutions
Expert in glue and dispensing solutions
PUT-5701 is FIPFG – Formed In Place Foam Gaskets which help to meet the demand for sealing quality and contour-accurate tightness of the components. PUT -5701 consists of a fluid to paste-like A-component (polyol) with varying molecular chain lengths for soft and hard foams and a hardener, the B-component (MDI). When mixing and curing, a soft foam seal is formed which cures at room temperature, without the use of a tempering furnace.
▪ Fully automatic, process-safe, flexible
▪ Fast, economical and efficient
▪ Low personnel expenses due to high degree of automation
▪ Short production cycles and high production speeds
▪ Reproducible quality of seamless, contour accurate foam seals
▪ Fast invisible self-levelling coupling point
▪ Free application process – no forming tools required as with 2K injection moulding
▪ Cost-effective alternative, especially for complex component geometries.
| Properties | PUT-5701-A | PUT-5701-B |
| Appearance | Paste | Paste |
| Color | Black | Brown |
| Viscosity *23°C, mPa*s | 2000 – 5,000 | 110 – 250 |
| Density without air loading [at 23°C] | 1.16 | 0.98 |
| Properties | PUT-5701 |
| Mix Ratio (A:B) by Weight | 5:1 |
| Tack-free time, min | 4 ~ 6 |
| Full cure time, h | 24 |
| Properties | PUT-5701 |
| Hardness (Depends on the Temperature and humidity) (Shore A) | 40 ~ 65 |
| Tensile strength (Mp) | 0.3 |
| Elongation at break (%) | 105 |
| Compress recuperation (long-term) °C | ~ -40 – +90 |
| Temperature resistance (short-term) °C | ~ -60 – +190 |
| Color of reacted product (RAL) | Black |
| Water absorption (weight-%) | < 10 |
| NCO content | 25.3%-26.5% |
Hiển thị tất cả 1 kết quả
Head office: 12 Alley 7, Street 80, Khuong Trung, Thanh Xuan, Ha Noi
