SYNTHETIC CHEMICAL VINA
Expert in glue and dispensing solutions
Expert in glue and dispensing solutions
3M™ Plastic Bonding Adhesive 2665B is a one-component, moisture curing, hot-melt urethane adhesive. This low viscosity adhesive has an intermediate open time and is ideal for structural bonding of plastics. It yields thin bond lines when used with appropriate processes and dispensing equipment and is black in color.
FEATURES:
APPLICATION:
| Adhesive Color | Black |
| Adhesive Type | One Part Urethane |
| Application Category | Bonding |
| Bond Type | Reworkable |
| Cure Method | Moisture Cure |
| Green Strength Time | 1.5 to 4.0 minutes @ 30 psi |
| OLSS (Overlap Stress Strength) | ~600 psi (plastic to plastic, pulled at 0.1 inch/min) |
| Open Time | 1.5 to 4.0 Minute |
| Set Time | 2 to 5 minutes |
| Suggested Min Bond Width Line | > 0.6 mm (and min bond line thickness of 0.2 mm) |
| Viscosity | 6500 – 9500 CPS @ 230 degree F |
| Adhesive Color | Black |
| Adhesive Type | One Part Urethane |
| Application Category | Bonding |
| Bond Type | Reworkable |
| Cure Method | Moisture Cure |
| Green Strength Time | 1.5 to 4.0 minutes @ 30 psi |
| OLSS (Overlap Stress Strength) | ~600 psi (plastic to plastic, pulled at 0.1 inch/min) |
| Open Time | 1.5 to 4.0 Minute |
| Set Time | 2 to 5 minutes |
| Suggested Min Bond Width Line | > 0.6 mm (and min bond line thickness of 0.2 mm) |
| Viscosity | 6500 – 9500 CPS @ 230 degree F |
Hiển thị tất cả 1 kết quả
Head office: 12 Alley 7, Street 80, Khuong Trung, Thanh Xuan, Ha Noi
